Procedure For Scan To Mailbox Setup Through Centreware Internet Services - Xerox WorkCentre 7232 Guía De Preparación

Procedure for Scan to Mailbox Setup through CentreWare Internet Services

1.
From a workstation, open up a web browser (such as Internet Explorer), and then enter
the device's IP address in the format http://xxx.xxx.xxx.xxx (the xxx's represent the
device's IP address). If connected properly, you should see a CentreWare Internet
Services web page for your device.
2.
Click the Scan tab.
3. Select Mailbox in the directory tree.
4.
When the numbered list of Mailboxes is shown, locate an unassigned mailbox with a
Mailbox Name of Not in Use from the displayed list and click the Create button for
that mailbox.
5.
Type in a name for this Mailbox in the Mailbox Name entry box.
6. Type in a pass code in the Passcode entry box. The passcode must be numeric.
7.
Confirm the pass code by retyping it in the Re-enter Passcode box.
8.
Use the drop-down arrow to set Check Mailbox Passcode (recommended) to secure
your mailbox.
9. Place a checkmark in the Auto Delete Documents box if you wish to delete documents
from your mailbox after retrieving same.
10.
Place a checkmark in the Delete Documents after Print or Retrieve box if required.
11.
Place a checkmark in the Delete Expired Documents to delete old documents that
have not been printed or retrieved.
12. Click Apply when done.
Note
If prompted to enter a User Name and Password, the default settings are 11111
and x-admin respectively.
Copyright © 2007, Xerox Corporation. All rights reserved.
Scan to Mailbox Setup (Optional)
7