Aviator 3000 Series; Scale Settings; Accessing The User Setup Mode; User Setup Parameters - OHAUS Aviator 3000 Serie Manual De Instrucciones

Aviator 3000 Series

5.

SCALE SETTINGS

5.1 Accessing the User Setup Mode

Press [PLU] [4] [4] [4] [4]. "oP " will be displayed, then press [FIX].
To navigate in the User Setup Mode:
 Press [FIX] to accept the displayed setting and proceed to the next step
 Press [>T<] to toggle through available settings
 Press [>0<] to return to the previous steps

Press [PLU] to end setup and proceed to "Save"

5.2 User Setup Parameters

Window Display
Weight Unit
Price
oP StEP 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Save
Note: Bold settings are default
Description
Key-press
beeper
Sleep /
Automatic
Power-off
(battery
operation only)
Automatic
clearing of tare
and unit price
Pre-pack (Fix)
Mode
Auto PLU
1 or 2 PLU's
per M-key
Filtering level
Communication
Save or Abort
Available Settings
ON
: Enables this function
OFF : Disables this function
0 : Sleep mode disabled / Auto-off disabled
1 : Sleep mode disabled / Auto-off after 30 min.
2 : Sleep mode after 5 min. / Auto-off disabled
3 : Sleep mode after 5 min. / Auto-off after 30
min.
4 : Sleep mode after 15 min. / Auto-off disabled
5
: Sleep mode after 15 min. / Auto-off after 30
min.
ON
: Auto-clear when weight is removed from
the pan
OFF : Manual clear by pressing [C]
ON
: Enables this function
OFF : Disables this function
ON : Search PLU automatically
OFF : Search PLU after pressing [PLU]
: 2 PLU's can be stored per M-key
ON
OFF : Only 1 PLU can be stored per M-key
0 : No filtering
1 : Low (faster display speed)
2
: Normal
3 : High
0
: "P" command
: command output and "P" command
1
2 : steady output
3 : continuous output
Save : Saves changes and restarts to weighing
mode
Abort : Restarts to weighing mode without saving
changes
EN-15