EN-4
2.
INSTALLATION
2.1 Unpacking
Unpack and verify that the following components have been included:
Scale
Weighing Platform
Power Adapter
Save the packaging material. This packaging ensures the ideal protection
for the storage or transport of the product.
2.2 Assembling
For tower models only, install the tower display first by removing the
retaining screw at the bottom of the tower, and the bottom plate of the tower
bracket at the back of the scale. Route the connector through the tower
bracket before mounting the tower, plug the connector into the bottom
socket, affix the tower to the bracket, then re-install the bottom plate of the
tower bracket.
Install the weighing pan as illustrated below, with the pan properly aligned.
2.3 Selecting the Location
Operate the scale on a firm, level surface. Avoid locations with rapid temperature
changes, excessive air currents, vibrations, electromagnetic fields, heat or direct
sunlight.
Instruction Manual
Tower assembly (tower models only)
Aviator 3000 Series