Ugin ARTIS Modo De Empleo página 27

3. KEY
Press this key to initiate the firing cycle.
By pressing the key a second time during the cycle, you interrupt the firing operation and return the
furnace to IDLE.
4. KEY
When programming (push on
Page 1
Flashing
It can be modified by pushing the keys
and minuscule) as well as number from 0 to 9.
Go to second character by push on
Return to precedent by push on
Confirm by push on
Pre drying
temperature
(0 to1000° C)
Page 2
Plateform rise time
(0 to 30min)
As previously described push the keys
Push the key
The procedure is the same as of « page 1 ».
) it allows to pen the 5 pages of parameters
PROG NAME
PROGRAMME STANDARD
key.
or go to the next page with
PREHEATING
LIFT 4'
to go on to the next parameter.
and , that gives access to the alphabet (capital
key etc....
key.
600° C
INTERN 4'
Internal pre dry time
(0 to 30min)
and to modify, the parameter flashing.
25
Flashing
ARTIS