GRAPHITE 59G021 Instrucciones De Uso página 10

TRANSLATION OF THE ORIGINAL MANUAL
MULTI PURPOSE TOOL
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
SAFETY WARNINGS FOR THE MULTIFUNCTION DEVICE
Hold the power tool by insulated gripping surfaces, because
the sanding surface may contact its own cord. Cutting a "live"
wire may make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
DETAIL SAFETY RULES (Multi purpose tool)
• During operation hold the tool firmly in closed hand.
• Before switching the tool on make sure it does not touch
processed material.
• Before cutting floor, wall or other surface make sure the cut area
is free from gas or electric installation. Cutting a live wire may cause
electric shock and cutting gas pipe may cause explosion.
• Do not touch moving parts of the tool.
• Do not put the tool aside before it stops completely.
• Hold the tool firmly in your hand before switching it on.
• Do not touch blade and processed material just after the work has
been finished, these pieces may be very hot and may cause burns.
• To replace blade or sanding paper, first switch the tool off with the
switch and wait until it stops working, then disconnect the tool from
mains socket.
• Prior to operation check if there is enough space under processed
material to avoid table or floor damage with the blade.
• Use anti-dust mask. Dust produced during operation is harmful to
health.
• Do not eat, drink or smoke in a room, where paint with lead
compounds is removed with this tool. There should be no
bystanders in the room. Contact with or inhalation of dusts with lead
compounds may be harmful to health.
• Before sanding connect dust extraction system to the tool.
• The tool is not designed for wet operation.
• Keep the power cord away from moving parts of the tool at all
times.
• When you see unusual behaviour of the tool, smoke or hear
strange noises, immediately switch off the tool and remove the plug
from mains socket.
• To ensure proper cooling during tool operation keep the
ventilation holes unobstructed.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and
additional safety systems are used, nevertheless there is always
a small risk of injuries at work.
CONSTRUCTION AND USE
Multi purpose tool is driven by single-phase motor whose rotation
is changed to oscillations. Various working tools available for the
tool allows for use in various types of tasks. This type of power tool
is widely used for: cutting wood, wood-based materials, plastics,
non-ferrous metals and joining parts (nails, bolts etc.). It can also be
used to process soft ceramic tiles, sanding and dry scraping small
surfaces. Possibility of processing abovementioned materials in
hardly accessible places and close to edges is an advantage of the
tool.
59G021
Range of use covers the following tasks: small model making,
locksmith, woodworking and any work from the scope of individual,
amateur activities (tinkering).
WARNING! Use the power tool according to the manufacturer's
instructions only. Use the power tool only with original
equipment.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the
drawing pages of this manual.
Sanding pad
Switch
Lever for quick-fastening of accessories
Oscillation speed adjustmant dial
*
Differences may appear between the product and drawing.
EXPLANATION OF THE PICTOGRAMS USED:
NOTE! Take special precautions!
Read the operating manual, observe the warnings and safety
conditions contained in it!
Second class of protection.
Use personal protective equipment (safety goggles, hearing
protection, dust mask).
Disconnect the device before repair.
Use protective clothing.
Protect the device against moisture.
Keep children away from the tool.
EQUIPMENT AND ACCESSORIES
Various working tips
Sanding paper (80#)
Transport case
PREPARATION TO WORK
SELECTION OF THE WORKING TOOL
The table shows examples of the use of working tools
Name HSS blade for metal
Metal (e.g. nails, bolts, small sections), non-
Type of
ferrous metals
material
Intended use Small dividing and plunge cutting
Cutting narrow sections short, cutting joining
Example
elements, e.g. clamps
9
- 6 pcs
- 5 pcs
- 1 pce