Technical Specifications - FLAEM Aspira Go P1611EM-20 Manual De Instrucciones

TECHNICAL SPECIFICATIONS

Mod. P1611EM-20 / P1611EM-30
Voltage
Internal battery supplied:
Battery autonomy:
Device size:
Weight:
Use
APPLIED PARTS
Type BF applied parts are:
Operating conditions:
Storage conditions:
Operating/storage
atmospheric pressure:
Suction:
Adjustable vacuum level:
Max air flow:
Noise (at 1 m)
Battery charging time
Ambient temperature
for battery charging
12V
2500 mAh; 14,8 V; lithium-ion
2500 mAh; 14,4 V; lithium-ion
2900 mAh; 14,4 V; lithium-ion
approximately 45 minutes
36 (W) x 14 (D) x 27 (H) cm
2.5 Kg
30 minutes ON/ 30 minutes OFF
patient accessories (16)
Temperature min. 0°C; max. 35°C
Relative humidity min. 10%; max 95%
Temperature min. -5°C; max. 35°C
Relative humidity min. 10%; max. 95%
min. 690 hPa; max. 1060 hPa
Mod. P1611EM-20
high vacuum / high flow
from -0.10 a -0.80 bar (approx)
(accuracy class 2.5)
20 l/min (approx)
63 dB (A) (approx)
minimum 7 hours
17
12 V VEHICLE POWER OUTLET
POWER CABLE
COD. 16667
In the event of a fuse failure, re-
place with a 5A - 250V approved
fast fuse, size Ø 6.3 x 30 mm, by
undoing the end of the plug to
be inserted in the vehicle power
outlet.
POWER SUPPLY
MULTI-VOLTAGE - SWITCHING
COD. 16545
Primary: 100-240V ~ 50/60Hz
Secondary: 12V
Mod. P1611EM-30
high vacuum / high flow
from -0.10 a -0.85 bar (approx)
(accuracy class 2.5)
30 l/min approx
62 dB (approx)
minimum 4 hours
From 10°C to 35°C
5 A 60W