Technical Information; Product Specifications - brondell Capella Manual Del Proprietário

TECHNICAL INFORMATION

Product Specifications

H2O+ CAPELLA REVERSE OSMOSIS WATER FILTRATION SYSTEM
Model
Filters
Product Dimensions
Net Weight
WATER STORAGE TANK SPECIFICATIONS
Product Dimensions
Volume
Maximum Operating Pressure
Maximum Operating Temperature
Tank Pre-Charge
Diaphragm Material
Construction Material
WATER STORAGE TANK WARNINGS:
• Do not use the tank for any applications other than its intended use as this might cause failure or
physical injury.
• Never exceed the maximum operating temperature of 104°F (40°C).
• Prior to any installation, re-installation, or work being performed on the tank or on the system, make
sure that the tank is disconnected from the system and no water is able to leak.
• The air chamber of the tank contains compressed air.
• If the pressure tank leaks or shows signs of corrosion or damage, stop use and contact Brondell
Customer Service.
24
RC250
Activated Carbon Plus , ER20 Membrane, Carbon Block
Assembled Filters & Hanger
13.5"L x 3.75"W x 13.5"H (34.3 L x 9.5 W x 34.3 H cm)
Tank with Stand
14.5"H x 8.5"D (36.8 H x 21.6 D cm)
11.4 lbs. (5.2 kg)
Tank with Stand
14.5"H x 8.5"D
(36.8 H x 21.6 D cm)
3.2 gallons
100 psi
104°F (40°C)
6 psi
Butyl Rubber
Stainless Steel