EN
DE
FR
DE
ES
IT
FR
EN
ES
IT
Deutsch (Übersetzung der originalen Anleitungen)
REPLACING WHEELS
WARNING
Only use replacement wheels approved by the
manufacturer of your mower. Using wheels not
approved by the manufacturer of your mower is
hazardous and could result in serious personal injury.
Stop the engine and disconnect the spark plug wire.
Allow the blade to come to a complete stop.
Remove the nut from the wheel axle, then remove the
wheel.
Replace with new wheel and reinstall nut to secure.
STORING THE MOWER
When storing the mower for 30 days or more:
Allow the engine to run until the mower is completely
out of petrol.
Once the engine has stopped, allow the blade to come
to a complete stop and disconnect the spark plug wire.
Turn mower on its side (with carburettor facing up) and
clean grass clippings that have accumulated on the
underside of the mower deck.
Wipe the mower clean with a dry cloth. Do not use a
garden hose or pressure washer to clean the mower.
Check all nuts, bolts, knobs, screws, fasteners, etc.,
for tightness.
Inspect moving parts for damage, breakage, and wear.
Have repairs made on any damaged or missing parts.
Store the mower in a well-ventilated area that is clean,
dry, and out of the reach of children.
Do not store near corrosive materials such as fertilizer
or rock salt.
To lower the handle before storing
Loosen the starter rope guide knob. Remove starter
rope from guide and allow to retract into engine.
Fully loosen the handle knobs on the sides of the
handle and fold the upper handle down.
Push inward on each side of the lower handle, and
lift the sides of the lower handle past the edges of the
handle mounting brackets.
Fold the lower handle forward, making sure not to
bend or kink the control cables.
PT
NL
SV
DA NO
FI
PT
NL
SV
DA NO
FI
English (Original instructions)
HU CS RU
RO PL
HU CS RU
RO PL
SL
TRANSPORTATION
Stop the machine, disconnect the spark plug wire and
wait until the blade comes to a complete stop, and
allow it to cool.
Empty the fuel tank by running the engine till it stops.
Empty oil by following instruction for changing oil.
Secure the machine against movement or falling to
prevent injury to persons or damage to the machine.
20
20
SL
HR ET
LT
LV
SK BG
HR ET
LT
LV
SK BG