Buchi I-300 Pro Manual De Instrucciones página 108

10 | Anexo
108/120
Holder, set. To fix Interface and Woulff bottle on
lab stand
To fix Interface I-300 / I-300 Pro, VacuBox, LegacyBox and
Woulff bottle / valve unit on a lab stand, Rotavapor® R-21x
or Vacuum Pump V-7xx. Incl. holder for Interface and
Woulff bottle, 2 M4x8 screws.
Holder. Wall mount, incl. support set
To fasten Interface on wall.
LegacyBox. Incl. accessory kit
Interface between Interface I-300 / I-300 Pro (with Vacu-
Box) to peripherals of older generations (Vacuum Pump
V-7xx, Recirculating Chiller F-1xx).
Level sensor. Incl. O-ring, cable, rubber band
Prevents an overflow in the receiving flask of condenser/se-
condary condenser. Placed on receiving flask. Meant to be
used with the Interface I-300 / I-300 Pro.
Power adapter. 30 V, 30 W, frequency 50/60 Hz
To power vacuum controller directly or to power interface
via LegacyBox or VacuBox.
Stand. V stand with rod, 600 mm
Used as a holder for interface or vacuum controller when
they cannot be mounted on a peripheral or wall.
Vacuum valve. Magnetic valve, 24V/4W, Mini-
DIN, 1.5 m
Flow valve without flask, meant to be used with a centrali-
zed vacuum source or an unregulated vacuum pump. Meant
to be used with the Interface I-300 /I -300 Pro.
Valve unit. Incl. Woulff bottle, 125 mL, P+G, hol-
der
Magnetic valve, meant to be used with the Interface I-300/
I-300 Pro. For operation with non-BUCHI vacuum pumps or
house vacuum.
Vapor temperature sensor. Incl. cap nut, seal
GL14
Measures the vapor temperature inside the system. Meant
to be used with the Interface I-300 / I-300 Pro.
Woulff bottle. 125 mL, P+G, incl. holder
For trapping particles and droplets and for pressure equali-
zation.
Büchi Labortechnik AG
N.º de pedido
11065362
11059132
11061166
11060954
11060669
048891
11060706
11061887
11060707
11059905
Manual de instrucciones Interfaz I-300 Pro
Figura