INSTRUCTIONS FOR USE
NOTE: Patient leg position symmetry can be documented using leg length indicator
markings on the stirrup posts.
3.3 Device controls and indicators:
The indicators below are placed on the sole of each boot.
3.4 Storage, Handling and Removal Instructions:
3.4.1 Storage and Handling:
The product should be stored in a clean and safe environment to prevent product
damage. See storage Specifications under Product Specification section.
3.4.2 Removal Instruction:
a.
Lower Stirrups by grasping and squeezing the Release Handles and
simultaneously down staging the legs slowly to the desired level. A.O.R.N.
recommends the lowering and staging process take two full minutes. Gently
remove patient's legs from Stirrups.
b.
Stirrups should be in horizontal position for removal from Rail Clamp slot. Loosen
clamp and remove Stirrups.
3.5 Troubleshooting Guide:
This device does not have a troubleshooting guide. For technical support user of
the device shall first contact Hill-Rom Technical Support.
3.6 Device Maintenance:
Make sure that all labels are installed and can be read. Replace labels as
necessary by using a plastic scraper to remove the label. Use an alcohol wipe to
remove any adhesive residue.
Document Number: D-720613
Version: C
This symbol represent the patient's right foot
This Symbol Represent the Patient's left foot
Page 15
Issue Date: 10 MAR 2020
Ref Blank Template: 80025117 Ver. F