Registering An Id; Overview; Detecting The Smart Servo - XYZ Robot A1-16 Manual Del Usuario

03

Overview

The default ID for a new servo is 1. Use the Servo Tool to configure the correct servo ID you wish to
replace the existing ID.

Detecting the Smart Servo

Before you open the Servo Tool, it is necessary to connect the MCU board and computer through a
USB cable.
The following procedure provides detailed instructions on how to connect to the smart servo:
Set up the hardware environment. See "Setting Up the Environment" on page 05 .
1.
2. Locate and open the XYZrobot Servo Tool application.
3. From the toolbar, select Config > Port to open the option window.
4. A list of available ports displays in the window. Select the port assigned to the connected MCU
board.
5. Click Confirm to continue.

Registering an ID