Product Description And Specifications; Intended Use; Product Features - Bosch 0 607 450 593 Manual Original

OBJ_BUCH-281-006.book Page 17 Friday, September 2, 2016 2:45 PM
 Hold the pneumatic tool with a not too firm yet secure
grip, compliant with the required hand-reaction forces.
The vibrations can be intensified the firmer you hold the
tool.
 When universal rotary couplings (bayonet couplings)
are being used, retaining pins are required. Use Whip-
check hose restraints to protect against failed hose
connections or the connection between hose and pneu-
matic tool.
 Never carry the pneumatic tool by the hose.
 Support the screwdriver with, for example, a reaction
bar when you are working at high torque. Work at high
torques may result in damaging reaction torques, which
can be reduced by using a support device.
 If you want to operate the pneumatic tool in a suspen-
sion device or a clamping fixture, take care to fasten it
in the device/fixture first before connecting it to the air
supply. This measure prevents accidental starting of oper-
ation.
Symbols
The following symbols could have a meaning for the use of
your pneumatic tool. Please take note of the symbols and
their meaning. The correct interpretation of the symbols will
help you to use the pneumatic tool in a better and safer man-
ner.
Symbol Meaning
 Before installing, operating, re-
pairing, maintaining and replacing
accessories as well as prior to
working near by the pneumatic
tool, please read and observe all in-
structions. Failure to follow the fol-
lowing safety warnings and instruc-
tions may result in serious injury.
Always wear ear protection.
Wear safety glasses/goggles
W Watt
Nm Newton metre
kg Kilogram
lbs Pounds
mm Millimetre
min Minutes
s Seconds
Revolutions or motions per
-1
min
minute
bar bar
psi pounds per square inch
Bosch Power Tools
Symbol
l/s Litres per second
cfm cubic feet/minute
dB Decibel
QC Quick-change chuck
Symbol for hexagon socket

Symbol for external drive
US fine thread
UNF (Unified National Fine
Thread Series)
G Whitworth thread
NPT National pipe thread
R
Right rotation
F
L
Left rotation
R
Product Description and Specifica-
tions
While reading the operating instructions, unfold the fold-out
page with the illustration of the pneumatic tool and leave it
open.

Intended Use

The pneumatic tool is intended for driving in and loosening
screws as well as for tightening and loosening nuts within the
given dimension and power range.

Product Features

The numbering of the product features refers to the illustra-
tions on the graphics page. The illustrations are partly sche-
matic and may differ from your pneumatic tool.
Power output
1 Tool bit (e.g. impact socket for hexagon bolts according
Unit of energy
to DIN 3129)
(torque)
2 Snap ring on the tool holder
Mass, weight
3 Tool holder
4 Suspension hook
Length
5 Rotational direction switch
Time period, dura-
6 Auxiliary handle
tion
7 Connection thread at air inlet
No-load speed
8 On/Off switch
9 Locking screw
Air pressure 10 Closing cap
11 Air outlet with silencer
English | 17
Meaning
Air consumption
Unit of relative loud-
ness
Tool holder
Connecting thread
Rotational direction
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
1 609 92A 39P | (2.9.16)