Technical Data; Noise/Vibration Information - Bosch 0 607 450 593 Manual Original

OBJ_BUCH-281-006.book Page 18 Friday, September 2, 2016 2:45 PM
18 | English
12 Screwdriving
13 Washers
14 Utility clip
15 Hose fitting
16 Hose clamp

Technical Data

Pneumatic Impact Wrench
Article number 0 607 450 ...
No-load speed n
0
Maximum torque according to ISO 5393
rotated right
Max. screw dia.
Tool holder
Engine oil SAE 40
Max. working pressure for tool
Thread size of hose connection
Inner diameter of hose
Air consumption at no-load
Weight according to EPTA-Procedure 01:2014

Noise/Vibration Information

Article number 0 607 450 ...
Sound emission values determined according to
EN ISO 15744.
Typically the A-weighted noise level of the pneumatic tool is:
Sound pressure level LpA
Sound power level LwA
Uncertainty k
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 28927:
Tightening of bolts and nuts of the maximum permitted size:
a
h
K
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in
EN ISO 11148 and may be used to compare one pneumatic tool with another. It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main applications of the pneumatic tool. However if the pneumatic tool is
used for different applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may
differ. This may significantly increase the exposure level over the total working period.
An exact estimation of the level of exposure to vibration should also take into account the times when the pneumatic tool is
switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintaining the pneumatic tool
and the accessories, keeping the hands warm, organisation of work patterns.
1 609 92A 39P | (2.9.16)
17 Supply-air hose
18 Tube connector
19 Clutch
20 Oil chamber
The accessories illustrated or described are not included as stand-
ard delivery.
... 593 ... 622 ... 626
-1
min 3100 4500 10000
Nm 1300 900
mm 33 27
 1"  3/4"  3/8"
ml 25 40
bar 6.3 6.3
psi 91 91
G 1/2" 3/8" NPT 1/4" NPT
mm 13 13
l/s
13 18
cfm 27.5 38.1
5.6
kg 9.6
lbs 21.2 12.3
... 593 ... 622
dB(A) 88 91
dB(A) 99 102
dB 3 3.0
2
m/s 6.2 3.7
2
m/s 1.1 0.9
... 627 ... 628
10000 7000
120 120 310
14 14 18
 1/2"  1/2"
15 15 25
6.3 6.3 6.3
91 91 91
1/4" NPT 1/4" NPT
10 10 10
6.0 6.0 8.5
12.7 12.7 18.0
1.5 1.5 2.3
3.3 3.3 5.1
... 626 ... 627 ... 628
86 86 87
97 97 98
3 3 3
< 2.5 < 2.5 3.5
1.5 1.5 0.8
Bosch Power Tools