Performance Data; Technical Data; External Dimensions - Enerpac ATP-1500 Instrucciones

3.0 SPECIFICATIONS

3.1 Performance Data

0
Note:
Pump air relief valve is factory set at 90 psi [6,2 bar] inlet air pressure, limiting the maximum hydraulic pressure to 25,000 psi [1750 bar].
Maximum hydraulic operating pressure is 21,755 psi [1500 bar].

3.2 Technical Data

Temperature Oil Viscosity
Range Range
-20 to +140ºF 150 -165 S.U.S.
[-29 to +50ºC] [15 - 25 C.S.T.]
*
Actual air consumption will vary depending on application. Refer to Section 4.4 for additional information.

3.3 External Dimensions

B
A
ATP-1500 Air-Hydraulic Pump – Flow vs. System, Pressure
80 PSI [5,5 bar] Air Pressure
5000 10000
[350] [700]
HYDRAULIC PRESSURE
Hydraulic Seal
Oil Type Materials
(recommended)
Buna
Enerpac HF
and Viton
90 PSI [6,2 bar] Air Pressure
100 PSI [6,8 bar] Air Pressure
(shown for reference only – see note at bottom of graph)
15000
[1050]
psi [bar]
Max Hyd. Sound Level
Pressure
(operating)
21,755 psi
70 dBA Max.
[1500 bar]
C
3
20000 25000
[1400] [1750]
Air Weight
Consumption* (including
(typical) oil)
21 SCFM 65 lbs.
[113 L/Min] [29.5 Kg]
Dimension Inches (mm)
A 15.3 [389]
B 15.75 [400]
C 15.0 [381]