Changing, Deleting Or Adding An Rfid Card/Tag; Changing A Username Or Phone Number; Adding/Deleting A User; Calendar Events Set Up - jablotron JA-103K Manual Del Usuario

4.2. CHANGING, DELETING OR ADDING AN RFID CARD/TAG

If the system is set up with prefi xed codes, users can add, change or delete their RFID tags or cards
from the LCD menu on the keypad. These changes are done after authorization by selecting Settings /
Users / User / Access card 1 (or 2). To enter a new RFID card/tag, you must enter edit mode (access
card 1 or 2 will start to fl ash) by pressing Enter. Then the RFID card/tag must be placed on to the
reader or the serial number must be manually entered. After confi rming by pressing Enter again, the
RFID card / tag is added. To delete an access card, enter "0" into the serial number fi eld. After the
changes are complete the change must be saved by selecting Save when the system prompts with
Save Settings?
The system administrator and the service technician can add, change and delete RFID cards/tags from
both the LCD keypad menu and the J-Link software.

4.3. CHANGING A USERNAME OR PHONE NUMBER

If the system is set up with prefi x codes, users can add, change or delete their telephone numbers or
change their name from the LCD menu on the keypad. This can be done after authorization by electi-
ng Settings / Users / User / Phone. The user must be in edit mode to make changes. This is done by
pressing Enter. After making the changes, they must be confi rmed by pressing Enter again. To delete a
phone number, enter "0" into the phone number fi eld. After the changes are complete the change must
be saved by selecting Save when the system prompts with "Save Settings?".
The system administrator and the service technician can add, modify or delete a user phone number
or change a user name from both the LCD keypad menu and the J-Link software.

4.4. ADDING/DELETING A USER

Only the system administrator or service technician can add new users to the system (or delete them).
New users can be added to the system (or deleted from it) only through the J-Link software, or the
F-Link software in the case of a service technician.
When creating a new user, it is necessary to assign him with access permissions (rights), sections
the user may operate, programmable outputs he may control, and what type of authorization will be
required.

4.5. CALENDAR EVENTS SET UP

It is possible to confi gure calendar events (unsetting
/ setting / partial setting, controlling or blocking PG
outputs).
The calendar events can be set up via the J-Link
software in the Calendar tab.
For each calendar event, action, section or PG output
and event time can be set. Day can be defi ned by a
day of week, month or year. For the selected day you
can set up to 4 times to perform an action or to set
repeating at regular intervals.
Therefore, calendar events can be customized not only for sections control but also for controlling
various technologies in the object using PG outputs.
5.

EVENT HISTORY

The security system stores all performed operations and events (setting, unsetting, alarms, faults,
messages sent to users and ARCs) in the micro SD card in the system's control panel. Each entry
includes the date, time (start and end), and source (cause/origin) of the event.
42