Safety Instructions - Enerpac QuickFace FF-120 Hoja De Instrucciones

Model FF-120

Safety Instructions

Glasses
Safety
• Wear protective clothing, including safety glasses,
gloves, hard hat, steel toe shoes, ear plugs (hearing
protection), hair restraints, and coveralls.
• Keep loose clothing, long hair, or any other
unsecured parts away from operating machines.
• Never wear jewelry when operating rotating
machinery.
• Keep the worksite clean. Use a brush to remove
chips from the work piece. DO NOT use your hands
or an air hose to remove chips.
• Ensure adequate work space around the work area
before mounting the machine.
• Support work material for total machine weight.
• Do not rush the job! Read and understand the
instructions before operating the machine.
• If ever a problem develops where a question about
safety or technical expertise is required, contact
Enerpac for assistance.
L3076 Rev.C
Gloves Hard Hat and Hearing
Protection
Steel Toe Shoes
• Keep hands away from machine when operating!
Adjustments should only be made when the
rotation has stopped. Keep hands away from all
pinch points.
• Do not strike or modify any equipment.
• Avoid awkward positions when possible. This
includes reaching, twisting, bending, working
overhead, kneeling, squatting, and holding fixed
positions.
• When performing repetitive work, take the following
into account: Pace of work, recovery time provided,
and the variety in work tasks.
• Minimize forceful exertion by keeping the tool
bit sharp, removing only the minimum amount
of material required, limiting the amount of time
machine is used per hour or shift, and keeping
proper body posture.
• To minimize contact stress, avoid kneeling on hard
surfaces and use proper protective equipment.
QuickFace Flange Facer
Coveralls
3