EN
2. INSTRUCTIONS FOR INSTALLATION
cleaned (follow the steps given in the "maintenance section".This
cleaning operation will avoid burning the accumulated dust and
other remains.
• This radiator CAN'T OPERATE with external programmable
controllers or any other exterior control device.
• CAUTION: Keep bags and other accessories well out of the
reach of children.
• The convection effect, together with other ambient factors, can
cause discolouring to metal surfaces and to plastics.
• Temperature differences can cause crackling and other noises in
the unit. This does not indicate any failure in the radiator.
• When the radiator is disposed of, the requirements established
by current legislation on waste processing and recycling shall be
taken into account.
2.1 WALL INSTALLATION
IMPORTANT
• It is important that the radiator IS FIXED FIRMLY TO A SOLID AND LEVELLED WALL.
• Make sure that there is a socket near the area where you are going to place it.
• Take out the wall pattern from the box to see the exact positions of the necessary drill
holes.
• You must keep a minimum distance of 15 cm between the radiator and any object, wall
or combustible material.
ECOVIEW / ECOVIEW S
18
(W)
"A" (mm)
"B" (mm)
"C" (mm)
600
240
425
277
900
240
425
438
1200
240
425
599
1500
240
425
760
1800
240
425
921
2. INSTRUCTIONS FOR INSTALLATION
1
Cardboard
template
2
Place the
four plugs.
IMPORTANT
EN
Drill four 10 mm
diameter holes.
3
Screw the
four supports
4.2x38mm.
Please, see
the next figure.
ECOVIEW / ECOVIEW S
EN
19