6.8.2
Dispensing
Do not direct the steam towards hands or other
parts of the body. Do not touch the steam nozzles
with bare hands; use the appropriate PPE.
• Immerse the automatic steam wand nozzle tips (1) into
the milk.
1
2
• Press the
button (2).
Autosteamer
• Wait until the dispensing process has been completed.
• To stop dispensing ahead of time, press the same button
again.
Autosteamer
Keep the tips clean at all times using a cloth damp-
ened in lukewarm water. Milk can be kept in the
fridge for a maximum of 3-4 days.
Adjusting the temperature
6.8.3
To adjust the activation temperature of the automatic steam
wand, follow the instructions provided in paragraph "6.11.7
Programming the Automatic Steam Wand Temperature" on
page 54.
6.9 Dispensing cappuccinos
• Put the suction tube in the milk.
• Place the jug under the spout of the
cappuccino maker.
• Open the steam valve and when the
desired amount has been obtained,
close the steam valve.
• Pour the frothed milk into the cups with
the coffee.
To obtain hot non-frothed milk,
lift the cappuccino maker flap
upwards. For better results, we
suggest that you do not dispense directly
into the coffee cup, but into a jug or pot,
and then pour the frothed milk on top the
coffee.
Be sure to constantly keep the cappuccino maker clean, by
following the instructions provided in paragraph "7.5 Clean-
ing operations" on page 59.
USER manual
6.10 Cup warmer
For safety reasons, we do not recommend placing
cloths or other objects on the cup warmer shelf in
order to prevent the machine from overheating.
HIGH TEMPERATURE HAZARD: the cup warmer
can reach temperatures that may cause burns. Be
very careful.
The cup warmer temperature can be set according to personal
requirements. The procedure for activating and adjusting the
cup warmer according to the model in your possession, is de-
scribed below.
6.10.1 "AL - AEP" versions
To use the cup warmer on this version of the machine, pro-
ceed as follows:
• Place the cups on the cup warmer (1) shelf of the coffee
machine.
• Turn the cup warmer switch (2) to the ON position.
A
2
To adjust the cup warmer temperature, proceed as follows:
• Remove the cup holder grille and drip tray.
• Turn the thermostat (A) to adjust the temperature or dis-
able the cup warmer. The cup warmer temperature will be
proportional to the value indicated on the thermostat.
Thermostat value
0
30
60
90
1
Cup warmer adjustment
Cup warmer OFF
Minimum temperature
Average temperature
Maximum temperature
51
216
of