5
Preparing beverages
There are three options for preparing beverages:
ū Standard dispensing,
ū Preparation with recipes (see chapter 6.1 Selecting recipes on page 27),
ū Use of the "My Coffee" function (see chapter 7 Personal settings – "My
Coffee" on page 29).
Standard dispensing is described in this chapter.
Note:
ū The storage containers should contain sufficient amounts of coffee and
water. If the filling level is too low, the appliance requests you to refill it.
ū The appliance does not indicate a lack of milk.
ū The vessels for the beverages should be sufficiently large (see table
Factory settings on page 47).
5.1
Preparing espresso and café crème
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "Espresso" or "Café crème" button.
»
The grinding process and beverage dispensing start.
»
Beverage dispensing is ended automatically.
3. Remove the vessel.
»
The ready symbol appears on the display.
5.2
Preparing cappuccino
Requirement: The ready symbol appears on the display and milk is con-
nected.
1. Place a vessel beneath the outlet.
2. Press the "Cappuccino" button.
»
The grinding process and coffee dispensing start.
»
Coffee dispensing is ended automatically.
»
Milk dispensing begins.
»
Beverage dispensing is ended automatically.
3. Remove the vessel.
»
Easy Cleaning? (OK for start) appears in the display.
Preparing beverages
23