Converting The Connection For The Milk Hose - melitta CAFFEO BARISTA T Manual Del Usuario

Changing basic settings
Requirement: The ready symbol appears on the display.
1. Open the cover (11). To do this, reach into the recess on the right of the
appliance and pull the cover off upwards.
2. Prepare any coffee beverage.
3. Move the lever (12) forwards or backwards whilst the grinder is running.
ū Backwards = grinding fineness coarser
ū Forwards
4. Close the cover. To do this, insert the bottom of the cover into the appli-
ance and swing it up until it engages.
» The ready symbol appears on the display.
Information
The grinding fineness is optimally set when the coffee flows evenly out of
the outlet and a fine, dense crema appears.
8.8

Converting the connection for the milk hose

The milk hose can be connected on the left or right side of the outlet.
38
37
Fig. 21: Turning the inlet
Proceed as follows to convert the outlet:
1. Pull the milk hose from the appliance.
2. Push the outlet down as far as it will go.
3. Release the milk unit (37) using two fingers and pull the milk unit down-
wards off the outlet.
4. Pull the milk distributor (38) upwards out of the milk unit.
5. Turn the inlet (39) 180°.
Installation is carried out similarly in reverse order.
36
= grinding fineness finer
39