9.4
"Easy Cleaning" programme
The milk system is rinsed using the "Easy Cleaning" programme.
Each time after preparing a beverage with milk, the appliance requests you
to execute the "Easy Cleaning" programme.
You can also run the "Easy Cleaning" programme manually.
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "menu/ok" button for 2 seconds.
»
The menu appears on the display.
3. Navigate to the Care > Easy Cleaning menu.
4. Use the arrow buttons to select Start and confirm with "menu/ok".
5. Follow the further instructions on the display up to the end of the "Easy
Cleaning" programme.
»
The ready symbol appears on the display.
9.5
"Cleaning milk system" programme
With this programme, the milk system is cleaned using a milk system clean-
ing agent.
To maintain hygiene and avoid damage to the appliance, we recommend
carrying out the cleaning programme once a week.
The cleaning programme takes approximately 3 minutes and should not be
interrupted.
ATTENTION
Use of unsuitable milk system cleaning agents may cause damage to the
appliance.
Use Melitta® PERFECT CLEAN Espresso Machines milk system cleaning
agent exclusively.
Requirement: The ready symbol appears on the display.
1. Place a vessel with a capacity of at least 0.7 litres beneath the outlet.
2. Press the "menu/ok" button for 2 seconds.
»
The menu appears on the display.
3. Navigate to the Care > Cleaning milk system menu.
4. Use the arrow buttons to select Start and confirm with "menu/ok".
5. Follow the further instructions on the display up to the end of the inten-
sive cleaning programme.
»
The ready symbol appears on the display.
Care and maintenance
39