Sanus Systems WMS2 Instrucciones De Ensamblaje página 3

Assembly Instructions for Model: WMS2
Thank you for choosing a Sanus Systems WMS2. The WMS2 is designed to hold a bookshelf speaker up to 12" (30.5 cm) deep and
weighing 15 lbs. (6.8 kg.).
Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a
qualified contractor or contact Sanus at 800.359.5520 or www.sanus.com. Check carefully to make sure that there are no missing
or defective parts. Our customer service representatives can quickly assist you with installation questions and missing or damaged
parts. Replacement parts for products purchased through authorized dealers will be shipped directly to you. Never use defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified by
Sanus Systems. Sanus Systems can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Please call Sanus Systems before returning products to the point of purchase.
Required Tools: Drill, 3/16" (0.5 cm) drill bit and a socket set
Supplied Parts and Hardware: Some parts not shown as actual size*
(2) Pivot - c* (2) Foot - d*
(2) Wall Plate - a* (2) Cover - b* (2) Extension - e* (2) Arm - f*
(8) Lag Bolt - g (2) Threaded Stud - h (4) Acorn Nut - i
(2) Pivot Bolt - j (2) Pivot Nut - k (6) Long Set Screw - l
(2) Short Set screw - m (1) Allen Key - o
(2) Cap - n
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com