Correct Exposure Indication In; Ttl Flash Mode - Metz MECABLITZ 44 AF-3 C Manual De Instrucciones

Funcionamente del flash TTL
o.k.
Fig. 9 / Grabado. 9
TTL-flash mode automatic exposure system will automatically
regard the changed diaphragm as the normal
Modo flash TTL
working aperture.
4.1.3 Correct exposure indication in TTL
„o.k." correct exposure confirmation only appears
on the mecablitz LC display if the shot was correc-
tly exposed in TTL flash mode!
If „o.k." is not displayed after the exposure, then
this means that the shot was underexposed. The
shot will then have to be repeated with the next
smaller f-number (e.g. f/8 instead of f/11) or the
flash-to-subject distance or reflecting surface must
be reduced (e.g. with bounce flash). Please note
the maximum flash range indicated on the meca-
blitz LC display (see 5.4.1).
24
After the exposure do not forget to reset the
TTL flash exposure correction back to the
normal value on the camera!
flash mode (Fig. 9)
Correct exposure is not indicated in the
viewfinder of Canon EOS cameras!