Motor Zoom Reflector; Auto-Zoom; Manual Zoom Mode „M.ZOom - Metz MECABLITZ 44 AF-3 C Manual De Instrucciones

Tabla de contenido

Publicidad

mecablitz and camera functions
Funzioni del mecablitz e della camera
mecablitz y funciones de la cámara
m
Fig. 21 / Grabado 21
TTL
mm
Auto Zoom
approx. 10 sec. to activate the mecablitz LC dis-
play illumination. The LC display illumination is
switched off when a flash is triggered.
The settings on the mecablitz are not chan-
ged when the above keys are pressed for
the first time!
If the shot was correctly exposed in TTL flash
mode, then the LC display illumination will be
activated during „o.k." display (see 4.1.3).

5.6 Motor zoom reflector

The reflector of the mecablitz provides full light
coverage for lenses of 28 mm focal length and
longer (35 mm format).
5.6.1 „Auto-Zoom" (Fig. 21)
If the mecablitz is operated with a camera that
transmits the focal length data to the flash unit,
then the zoom reflector position will be automa-
tically adapted to the focal length of the lens.
When the mecablitz is turned on, the LC display
will indicate „Auto Zoom" and the current re-
flector position.
Automatic reflector adaptation commences with
lenses of 28 mm focal length. If a focal length
shorter than 28 mm is used, then the „28" indicat-
ed on the LC display will start to flash as an indi-
cation that the mecablitz cannot fully illuminate
the shot right out to the image corners.
A wide-angle diffuser (optional extra, see
section 7) can be clipped onto the reflector
for lenses of 24 mm focal length and lon-
ger.
5.6.2 Manual zoom mode „M.Zoom"
The position of the zoom reflector can also be
manually changed, for instance to achieve speci-
fic lighting effects (e.g. hot-spot, etc.). Repeated
depression of the „Zoom" key on the mecablitz
will successively select the following reflector po-
sitions:
28mm - 35mm - 50mm - 70mm - 85mm -
105mm
The mecablitz LC display indicates „M.Zoom" for
manual zoom setting and the current zoom posi-
tion (mm). The setting becomes instantly effective.
The display is switched back to its normal state
after approx. 5 sec.
If manual adjustment of the zoom reflector
42

Publicidad

Tabla de contenido
loading

Tabla de contenido