SATA SATAjet 1000 A RP Instrucciones De Servicio página 22

Operating Instructions Extensions jet 1000 A RP, B RP, K RP
tighten.
■ Push paint needle [3-9] into spray gun as described in the operating
instructions for the air gun and mount accordingly.
Removing from the spray gun
■ Pull paint needle [3-9] out of spray gun as described in the operating
instructions for the air gun.
■ Unscrew the air pipe [3-11] over the connecting piece [3-10] of the
spray gun and remove carefully.
■ Unscrew the paint pipe [3-8] from the spray gun using the universal
spanner [3-12] and remove carefully.
5.4. Rotary nozzle set (360°)
Notice!
Operation only possible with pressurized material supply!
Assembly
■ Coat the male thread of the air pipe module [4-3] with Loctite 276.
■ Screw air pipe modules [4-3] and [4-4] together and tighten up to the
limit.
■ Coat the male thread of the paint pipe module [4-6] with Loctite 276.
■ Screw paint pipe modules [4-6] and [4-7] together and tighten up to
the limit.
■ Coat the male thread of the paint needle module [4-9] with Loctite 276.
■ Screw paint needle modules [4-8] and [4-9] together and tighten up to
the limit.
Fitting on the spray gun
■ Screw paint pipe [4-10] into spray gun and tighten with universal span-
ner [4-14] .
■ Screw air pipe [4-13] over connection piece [4-12] on spray gun and
tighten.
■ Push paint needle [4-11] into spray gun as described in the operating
instructions for the spray gun and mount accordingly.
Removing from the spray gun
■ Pull paint needle [4-11] out of spray gun as described in the operating
instructions for the air gun.
■ Unscrew the air pipe [4-13] over the connecting piece [4-12] of the
22