STAUFF PPC-CAN-FR Manual De Instrucciones página 54

Meter Settings
For sensors that cannot be automatically detected by the meter follow-
ing configuration using the PC configuration program, the measurement
range must be set in the meter. Apply to the same settings in the meter
that you previously set with the PC configuration program.
1 Depending on the meter used, select the menu item external sensor
or AUX. SENSOR.
2 Select the channel to which the frequency adapter is connected.
3 Enter the same settings as in the PC configuration program:
- Measurement Unit = quantity to be measured (L/min, 1/min, 1/s)
- FROM = 0
- TO = maximum reading
- SIGNAL = V
- FROM = 0
- TO = 3.
54