Rear Panel - Korg sv2 vs Guia De Inicio Rapido

8| English

Rear panel

The back panel is where you can find most of the connections.
3 4
1 AC IN POWER connector
Connect the included IEC power cable here.
2 MUSIC STAND holes
A music stand comes standard with your SV­2. Insert its legs into these two
dedicated holes.
3 USB DEVICE connector
Use this connector to connect a computer for sequencing (this doubles the
MIDI ports), or for using the SV­2 Editor software for fine editing. Before
using this connector, please install on your Windows PC the KORG USB­MIDI
Driver (the relevant instructions are provided together with the MIDI Driver,
that can be downloaded from our
For the latest information on OS support, please see our dedicated web page
(https://www.korg.com/support/os/).
4 SPEAKERS ON/OFF switch (only models with integrated speakers)
Use this switch to turn the integrated speakers on or off.
5 PEDAL jacks (DAMPER, 1, 2)
Connect the supplied KORG DS­2H pedal, or the optional DS­1H, to the
DAMPER jack. This jack always operates as a damper pedal.
1
5
2
6 7
web site).
8