Installation With Wall Bracket; Water Connection (Metal Wall Bracket) - clage M-O Serie Manual De Instrucciones

Installation
• The water pipes must not exert any mechanical force on the water connections of the
instantaneous water heater during installation and operation. If this cannot be guaranteed
due to the installation conditions, we recommend the use of flexible connections.
• This appliance is not suitable for warm water supply to showers.

2.3 Installation with wall bracket

1. Secure the wall bracket to the wall with suitable screws and dowels.
2. Place the appliance onto the wall bracket and snap it into position.
Fig. 4: "Installing the wall bracket"

2.4 Water connection (metal wall bracket)

1. Place the metal wall bracket in a central position above the water connection as per the
installation template. The metal wall bracket allows the appliance to be installed at a varia-
ble distance from the wall (up to approx. 15 mm from the wall).
Fig. 5: "Installing the metal wall bracket" (dimensions in mm)
21
CLAGE
EN