Handle Positions; Using The Designer Canopy - CYBEX ATON 2 Manual Del Propietário

Handle Positions

The Handle has four LOCKED positions:
1. DRIVE and CARRY
2. 1ST LOADING POSITION
3. 2ND LOADING POSITION
4. RESTING
To move handle to a new position, squeeze BOTH Handle Adjustment Buttons
a
(one on each side) while rotating handle
BOTH Adjustment Buttons must be depressed at the same time in order
for the handle to move.
WARNING!
• ALWAYS have the handle LOCKED in the DRIVE/CARRY position while
using this child restraint in a vehicle.
• ALWAYS verify that the handle is LOCKED in the DRIVE/CARRY position
before lifting Infant Carrier by the handle. An unlocked handle could
move unexpectedly, causing child to fall out.
• ALWAYS KEEP your child properly secured in the Harness even when
using the carrier outside of the vehicle.
• NEVER HANG toys or other objects from handle when using child
restraint in a vehicle as they could seriously injure a child in a sudden
stop or crash.

Using the Designer Canopy™

Simply pull forward to extend the Aton 2 Canopy. The Canopy has two
positions as shown.
To retract the Canopy, gently push it back into its original position.
Using the Infant Carrier
b .
DEATH or SERIOUS
INJURY can occur
1 2
a
1
2
3
4
b
17