Franke CRYSTAL CR 86 M F Serie Manual De Instalación Y Servicio página 17

Horno multifunción
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 79
CL 85 M / CM 85 M / CR 86 M _/F / SM 86 M _/F / SMP 86 M_/F
Removing the oven door (Fig. 4)
To facilitate oven cleaning, the oven door
can be removed by operating on the hinges
as follows:
X
X
The hinges are equipped with two
moveable locks (A). Lift the lock (A)
to release the hinge.
X
X
Then lift the door up and pull it outwards;
to do this, hold the door at the sides near
the hinges.
X
X
To refit the door, first slide the hinges into
their grooves.
X
X
Before closing the door, remember
to turn the two locks (A) used as hinge
attachments.
Refer to the pictures at the end of this manual.
Removing the side frames
X
X
Bend the crosspiece engaged in the fixing
bush downwards and remove it from
the groove.
X
X
Tilt the frame upwards by approx. 60°
and push it slightly in the direction
of inclination.
X
X
Keeping the frame tilted, remove the two
top hooks from the respective holes.
1
Fitting the side frames
X
X
Keeping the frame tilted, insert the top
hooks in the respective holes, pushing
lightly in the direction of inclination.
X
X
With the frame tilted, pull in the direction
of inclination until the top hooks stop
against the outside of the compartment
wall.
X
X
Turn the frame towards the compartment
wall. Bend the crosspiece engaged
in the fixing bush downwards and remove
it from the groove.
Replacing the oven lamp
A
X
X
Turn off the power to the appliance
by means of the omnipolar switch used
for connecting it to the electrical system,
or disconnect the plug if accessible.
X
X
Unscrew the glass cover (A).
X
X
Unscrew the lamp and replace it with one
resistant to high temperatures (300 °C),
with the following characteristics:
Voltage: 220/240 V ~ 50-60 Hz
Power: 25 W
Connection: G9
X
X
Refit the glass cover (A) and reconnect
the power supply.
CAUTION! Damage to the lamp due to wrong
handling!
Z
X
Avoid touching the lamps with bare hands.
Z
X
Use a cloth or a sheet of kitchen paper.
3
shock!
Z
X
Ensure that the oven is switched off before
replacing the lamp.
2
due to wrong handling!
Z
X
Switch the oven off.
– 17 –
Franke ovens are
equipped with
a circular lamp
positioned in the top
left area at the back
of the compartment.
To replace the oven
lamp, proceed
as follows:
WARNING! Possibility of electric
W
ARNING! Electric shock
Depending on how the oven
is installed: Unplug the oven
or disconnect the power at the main
electrical system switch, e.g., switch
off the fuse of the oven in the fuse box.
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido