Eldom robo BL55 Manual De Instrucciones página 7

OPERATING INSTRUCTION
EN
HAND BLENDER BL55
fot. 1
1
2 3 4
GENERAL DESCRIPTION
fot. 2
1. Speed switch
2. Switch
3. motor unit
4. Drive shaft
TECHNICAL DETAILS
- Rated power: 250W
1
- mains supply: 230V ~ 50 Hz 2
- Brief operation without interruption - 30 seconds
- time of the interruption before switching
on again: 5 minutes
OPERATION OVERVIEW
Before using the blender for the first time please disassemble the drive shaft (4), wash it carefully and
dry. It should be washed by hand with regular dishwashing liquid. Never immerse the whole blender
in water. the only washable part is the drive shaft with metal blade.
the mode of assembling the device has been illustrated on the fot 2.
to begin the work press and hold the switch (2). the blender is working as long as one of the switches
is pressed.
Depending on the products processed, select with a switch (1) low or high speed
It is recommended to read carefully the safety instructions specified below.
Do not extend the recommended operation time of the blender. Such extensions and lack of
interruptions can cause serious and irreversible damage of the motor unit.
In case of blocking pull the plug of the socket before cleaning.
•
EN 7