To Install A Power Module; Sterile Assistant; Circulating Assistant - Stryker SYSTEM G 7305-001-000 Instrucciones De Uso

EN

To Install a Power Module

Sterile Assistant

1. Set the safety switch to the safe mode position.
2. Turn the latch to the unlock position and open the
door.
3. Place the sterile transfer shield over the open
compartment.
4. Present the compartment to the Circulating Assistant.
8

Circulating Assistant

WARNING: DO NOT contaminate the handpiece.
The transfer shield guards the sterile handpiece from
contamination during power module installation.
1. Hold the power module by the handle.
2. Insert the power module through the transfer shield
into the open compartment.
3. Push the handle down.
7305-001-700 Rev-A
www.stryker.com