diversey Taski swingo 2100µicro Traducción De Las Instrucciones Originales De Uso página 12

Danger:
If there is a danger of falling objects while the ma-
chine is in use, the necessary safety precautions
must be taken or adhered to in accordance with na-
tional regulations.
Notice:
When working in public buildings, the warning light
must be switched on.
• Sit down on the driver seat.
• Check whether the emergency stop button is released.
• Switch on the machine (key switch).
The indicator elements will light up briefly.
Manual program start
• Press the Suction unit ON/OFF but-
ton.
The display lights up, the suction mo-
tor starts and the squeegee is auto-
matically lowered to the operating
position.
• Press the Cleaning solution supply
ON/OFF button.
The display lights up.
The cleaning solution supply is start-
ed when the brushes rotate.
• Select the intended dosage level by
pressing the +/- buttons from level 1
to 6.
Notice:
Diversey recommends sustainable working by de-
termining the right product dosage.
Overdosing or underdosing will lead to unsatisfactory
cleaning results.
Notice:
TASKI offers an automatic dosage feature as an op-
tion. It is possible to mount it additionally.
- Please contact your customer service.
• Press the Brush drive ON/OFF but-
ton.
The display lights up, the brush unit
is lowered and the engaging process
starts automatically.
ECO mode
• The ECO mode is activated by press-
ing the ECO mode ON/OFF button.
The rotational speed of the suction
engine is thus reduced and the dos-
age of the cleaning solution is set to
level 2.
Notice:
If required, the level of the cleaning solution can be
adjusted manually in ECO mode. The ECO mode is
suitable for smoother floors without joints.
Function of the lateral swiveling
• Press the lateral swiveling button
ON/OFF.
• As a result, the brush unit and the
squeegee will be swiveled out.
Caution:
When reversing with lateral swiveling, please make
sure that the brush unit and squeegee do not get
caught.
The brush unit and the squeegee as well as shelves
and other fixtures could be damaged.
Starting the machine using the program button
• By pressing the program button for
the next operation start or work step,
all machine functions are started on
the basis of the functional values last
used.
Notice:
By pressing a button again, the function will be re-
programmed.
Notice:
The set values can be adjusted at any time during
operation.
The values set when the machine is switched off are
stored and will be automatically activated when the ma-
chine is restarted.
Notice:
Pressing the program button when the cleaning
process is finished will start an optimized program
for the end of operation. See instructions on page
13 in the "Automatic process" chapter.
Settings and activated functions are saved.
Cleaning start
• If the machine is switched on and the
operator is sitting in the driver's seat,
the machine will start moving as soon
as the gas pedal is depressed. If se-
lected, the brush unit is started and
the cleaning solution supply is open.
Notice:
The speed is controlled by the position of the gas
pedal. When the gas pedal is released, the machine
will automatically decelerate until it stops and the
parking brake is activated.
The supply of the cleaning solution will be interrupted,
then the brush unit will be stopped with a delay.
11