Cleaning the fresh water tank filter
Notice:
Clean the fresh water tank filter after the end of op-
eration.
• Unscrew the fresh water tank filter
and remove it.
• Rinse the filter thoroughly with clean
water.
Removing and cleaning the brush
Caution:
Clean the brush whenever cleaning work is com-
pleted.
• The machine must be switched off.
• Press the brush release with your
foot.
• Remove the brushes and clean them under running water.
Cleaning the machine
Caution:
Never clean the machine with a high-pressure
cleaner or water jet.
Water ingress in the machine may cause considerable
damage to the mechanical or electrical parts.
• Wipe the machine with a moist cloth.
Storing / parking the machine (not in opera-
tion)
Notice:
Store the machine with a lifted suction nozzle, lifted
brush and open tank lid.
Thus, the tank can dry, and the generation of mold and
unpleasant odors is prevented.
Caution:
Never store the machine with uncharged batteries.
Otherwise, the batteries will be damaged beyond repair.
Service, maintenance and care
The maintenance of the machine is a prerequisite for impeccable op-
eration and a long service life.
Caution:
Use original TASKI parts only; otherwise any war-
ranty and liability claims will be invalidated.
14
Notice:
In order to rule out unintended machine functions,
the following must always be carried out before
starting maintenance works
- the machine must be switched off,
- the key removed and
- the emergency stop confirmed.
Legend:
◊ = after every cleaning, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service light
Activity
Charge batteries
Replenishing distilled water (wet-cell
batteries). Observe the service sheet of
the battery supplier!
Draining and cleaning the recovery and
fresh water tanks
Check the intake and suction filter for
contaminations and clean them
Clean all parts marked in yellow
Clean the brushes
Clean the suction nozzle, check the
blades for wear and change them if
necessary
Wipe the machine using a damp cloth
Clean the gasket of the tank cover,
check for cracks and replace it if neces-
sary
Check parking brake and emergency
stop button
Maintenance and service program car-
ried out by Diversey service techni-
cians
Service intervals
TASKI machines are high-quality machines that have been inspected
for safety at the factory by authorized inspectors. Electrical and me-
chanical parts are subject to wear and aging after a longer period of
use.
• In order to maintain operational safe-
ty and readiness for use, the ma-
chine must be serviced whenever the
maintenance indicator lights up (fac-
tory setting is 650 working hours) or
at least once a year.
Notice:
In case of extraordinary use and/or insufficient
maintenance, shorter intervals may be required.
Service center
Please always indicate the type and number of the machine whenev-
er you contact us to place an order or in case of malfunctions.
You can find this information on the nameplate of your machine. The
address of your closest TASKI service partner is provided on the last
page of these instructions of use.
●
7
●
7
●
13
●
●
●
14
●
13
●
14
●
●
7
●