Scheduling - Amibot Prime Manual Del Usuario

Product Operation

3. Scheduling

Activate Schedule Cleaning
The schedule cleaning that available on this robot is based on 24 hours delay. The
schedule cleaning can only be activated when the robot is in
A) charging mode
B) cleaning mode
We can activate the schedule cleaning by pressing the "PLAN" button on the remote
control for 3 seconds. Once the robot received the command, it will Beep for ONE time,
and the "CLEAN" button will turn purple colour, the robot is now programmed for daily
scheduled cleaning.
For example, it's 9AM now and you press the "PLAN" button on the remote control for
3 seconds, the robot will start cleaning at 9AM the next day, and every day until the
scheduled cleaning is cancelled.
Deactivate Schedule Cleaning
The schedule cleaning will be deactivated in the below methods:
A) Press and hold the "PLAN" button on the remote control, and then press the
"HOME" button together. Once the robot received the command, it will Beep for ONE time.
Check Schedule Setting Status
Press the "PLAN" on remote control, when the "CLEAN" on robot turn to purple color, that
means the schedule setting works, otherwise, you need to make schedule setting again.
Note:
a. The robot will start cleaning at the scheduling time of Robot Clock every day.
b. The robot can only be set when it's in Standby or charging mode.
11