- Never fill the irrigation solution tanks while
they are on the device.
- Do not fill the irrigation solution tanks beyond
the level shown by the border on each tank.
- When the device is not to be used for a long
period of time, rinse thoroughly, then unplug
the device from the electric supply.
Environment:
- Do not cover the device or obstruct the
ventilation vents.
- Do not immerse the device in liquid, and do not
use it outdoors.
- Do not tilt the device at an angle greater than
5°.
- Do not place the device near a heat source.
- Make sure that the cords are not in the traffic
path.
- The device should be stored in its original
packaging in a safe place.
- The device is not designed for use in the
presence of anesthetic gases or any other
flammable gas.
- Do not expose the device to water vapor, or
splashes.
- The device is not designed to work near ionizing
radiation.
- Do not insert metal objects into the device (risk
of electric shock, short-circuit or emission of
hazardous substances).
Maintenance:
- It is essential to rinse your device, before and
after each use.
- To avoid any reaction between different
irrigation solutions which may be used
(crystallization, precipitation, etc.), it is
essential to rinse the irrigation solution tanks
and irrigation solution circuit with distilled or
dematerialized water each time the irrigation
solution is changed.
6
Accessories:
- The device can only accept accessories
designed by SATELEC for the particular use for
which they are intended.
- Use of accessories from other manufacturer is a
potential hazard for you or your patients.
Repair:
- Do not repair or modify the device without prior
authorization from SATELEC.
- In the case of a fault, contact the supplier of
your device. Do not use unauthorized repairers,
who might make your device dangerous for you
and your patients.
If you have any doubt, contact an approved
dealer or our customer support department:
- www.acteongroup.com
- E-mail: satelec@acteongroup.com.
III - DESCRIPTION
3. 1 PHYSICAL DESCRIPTION
The P M
N
XS has seven elements:
AX
EWTRON
- a control unit (Fig. 1-1).
- a footswitch (Fig. 3-1).
- a plug-in cord with handpiece connector (Fig. 1-
12).
- two tanks for irrigation solution (Fig. 1-10).
- two irrigation solution tank covers (Fig. 1-11).