ATH M126 Manual Del Usuario página 55

Tyre bead breaker
Preparation
Check the following points before using the device:
- Check whether the power supply is connected properly.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Move the assembly tower all the way up.
Place the wheel in front of the machine's clamping jaws and clamp
by operating the clamping lever.
In the case of aluminium rims, please use the enclosed
clamping ring
The wheel can then be brought into a 90° position by operating the
lever for swivelling.
Unscrew the valve insert on the wheel valve and let out all the air.
Manufacturer ATH-Heinl GmbH & CO.KG
- 9 -