Operation; Operating Instructions - ATH M126 Manual Del Usuario

3.0

OPERATION

3.1

Operating Instructions

Company:
Place of work:
Operation:
Risks to People and the Environment
Noise danger

Danger of being caught on machine

Danger due to uncontrolled moving parts

 Danger from charged dust in the brake system
Protective Measures and Rules of Conduct
Wear close-fitting clothes

Do not wear a watch, rings, chains or similar jewellery when working

 Wear ear protection and safety goggles.
 Longer hair should be secured by a hair net or other measure
Only use impact wrenches that don't blow air on the wheel rim.

 Clean wheels and tyres only when wet to avoid dust build-up; if possible, use wheel washing
systems.
 Remove dust on the brake drums with an extraction bell with suitable industrial vacuum cleaners.
Use category U equipment for asbestos-free dusts and category K1 for asbestos-containing dusts.
(Observe current GUV regulations)
 Damaged tyres must not be used.
 When inflating the tyre, set up a guard to catch any flying parts. Keep people out of the danger area.
 Tyre filling must be monitored and the maximum permissible assembly air pressures must not be
exceeded.
 Only operate motor-driven wheel balancers with a protective hood.
For large wheels of trucks and self-driving machines:

-
-
Response to faults and hazards
 Machine defects must be reported to the manufacturer immediately
Switch off the machine and secure against unauthorised restart

 Damage should only be repaired by qualified personnel
First Aid
Inform first aiders (see alarm/emergency plan).

 Treat injuries immediately.
 Enter into the accident book
Contact emergency services for serious injuries.

Emergency
Maintenance
 Repair only by instructed and trained persons
 Disconnect or secure the machine from the mains power supply for set-up, adjustment,
maintenance or servicing
Clean the machine after operation is ended

Annual check of the machine by an authorised and trained person

® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Operating Instructions
Tyre Servicing
On machines with vertical wheels, work with heavy tyres (for example, EM tyres) must be
carried out by two people.
For tyres with a diameter >1.4 m or a weight >200 kg, fall-protection devices must be used.
number:__________ Ambulance service: ____________
Manufacturer ATH-Heinl GmbH & CO.KG
for
- 23 -
Date:
Signature: