ATH M126 Manual Del Usuario página 57

Removing the tyre with the bead breaker roller
+
Removing the tyre with the mounting finger
&
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
If the tyre is not being used again or reconditioned, it is
possible to completely push it off the rim from below. This
procedure may result in damage to the inner steel structure.
When the bead breaker roller is in the lower position (last step of
bead breaking), it is possible to continue the removal process by
pressing the lifting lever.
The tyre must be constantly rotated during this process.
Swivel the finger into position ready for mounting.
Bring the mounting finger into a 90° position so that it can be
driven between the tyre and rim to grip the tyre with the hook.
Manufacturer ATH-Heinl GmbH & CO.KG
- 11 -