ATH M126 Manual Del Usuario página 59

Position the tyre such that it is in the upper recess of the rim.
Ensure that the tyre does not slip off the rim when lifting
>
Swivel the wheel and tyre upwards as one and press the tyre under
the rim flange using the roller.
+
If necessary, the hold-down clamp can be attached at this point.
In the case of sharp-edged rims (e.g. agricultural rims),
we recommend using the finger to mount the upper bead in order
to avoid damage to the tyre bead
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 13 -