Mopar 82212166 Manual De Instrucciones página 11

30. Re­install the TIPM to the bracket. Make sure all four
retaining tabs (1) are seated properly.
31. Position the positive battery feed (2) to the TIPM.
32. Install the red/white power eyelet (2) from the rear fog
lamp relay (3) to the TIPM power stud and tighten the
retaining nut (1) securely.
33. Re­install the TIPM cover.
34. Remove the ground stud (1) from the inner fender.
35. Install the rear fog lamp relay ground eyelet (2) to the
ground stud (1) and securely re­install to the inner
fender.
Feb 18, 2011
11
K6860984