Descargar Imprimir esta página

Mopar 82212166 Manual De Instrucciones página 14

Publicidad

Idiomas disponibles

Idiomas disponibles

14
53. Using the kit supplied tie strap(s), secure the relay (1)
and harness to the existing vehicle harness forward of
the TIPM away from any sharp edges or moving parts.
54. Install the positive battery cable grommet.
55. Carefully pull the overlay harness rearward to re­
move any un­necessary slack.
56. Using the kit supplied tie strap(s), secure the portion
of the overlay harness located in the engine compart­
ment.
57. Close the hood.
58. Route the overlay harness (1) rearward down the scuff
panel area towards the rear door opening.
59. Tuck the harness under the carpet. Avoid retaining
clip mounting locations.
Feb 18, 2011
K6860984

Publicidad

loading