Mopar 82212166 Manual De Instrucciones página 13

46. Route the overlay harness (1) forward, under the har­
ness bracket towards the TIPM.
47. Connect the previously removed small connector (2)
to the overlay jumper harness relay (3).
48. Locate the black/violent wire on the relay connector
(3). Once located, populate the white wire (1) from the
overlay harness into that side of the small connector
(2).
49. Locate the black wire on the relay connector (3). Once
located, populate the black wire (1) from the overlay
harness into that side of the small connector (2).
50. Position the positive battery cable junction block and
engage the retaining tabs.
51. Install the positive battery cable (2) to the positive bat­
tery cable junction block.
52. Install the retainer (1) to the positive battery cable
junction block.
Feb 18, 2011
13
K6860984