Ec Conformity Declaration - CEMO CUBE-Tank Manual Del Usuario

10. EC Conformity Declaration to Machinery Directive
2006/42/EC Appendix II 1.A
EC Conformity Declaration to Machinery Directive 2006/42/EC Appendix II 1.A
The manufacturer / distributor
CEMO GmbH
In den Backenländern 5
D-71384 Weinstadt
hereby declares that the following product
Product designation:
Make:
Serial numbers:
Serial/type designation: CUBE-Tank (PE)
Description:
Container for the safe storage of liquids, including water-hazardous substances (in Germany, e.g., to
WGK 1, 2 and 3) as well as flammable liquids with a flashpoint of > 55 °C as well as filling therefrom
(also use in water conservation areas through the basic double-walled version)
complies with all relevant specifications from the above-named directive and further applied directives
(see below), including their amendments applicable at the time of the declaration.
The following harmonised standards were applied:
EN 13478:2001+A1:2008
EN 349:1993+A1:2008
EN 547-3:1996+A1:2008
EN 60204-1:2006/A1:2009
EN 61310-2:2008
EN 809:1998+A1:2009
EN ISO 12100:2010
EN ISO 13857:2008
Name and address of legal entity authorised to assemble the technical documentation:
see above (= manufacturer)
Location: Weinstadt
Date: 09.12.2013
_______________________________________
(Signature)
Eberhard Manz, CEO CEMO GmbH
Filling station (Diesel, AdBlue®, lubricant)
CEMO
10292-10299,10301-10306, 10308-10313
Safety of machinery - Fire prevention and protection
Safety of machinery - Minimum gaps to avoid crushing of parts
of the human body
Safety of machinery – Human body measurements –
Part 3: Anthropometric data
Safety of machinery - Electrical equipment of machines –
Part 1: General requirements (IEC 60204-1:2005/A1:2008)
Safety of machinery – Indication, marking and actuation –
Part 2: Requirements for marking (IEC 61310-2:2007)
Pumps and pump units for liquids - Common safety requirements
Safety of machinery – General principles of design –
Risk assessment and risk reduction
Safety of machinery - Safety distances to prevent hazard zones being
reached by upper and lower limbs (ISO 13857:2008)
GB
29