CEMO CUBE-Tank Manual Del Usuario página 31

National Technical Approval
No. Z-40.21-510
I GENERAL PROVISIONS
1 National Technical Approval certifies that the object of approval can be used and/or employed
within the meaning of the German state building codes.
2
Where National Technical Approval requires special knowledge and experience from persons
responsible for manufacturing construction products and design types pursuant to § 17, Para. 5
of the Model Building Code in German state regulations, it should be noted that this specialist
knowledge and experience can be attested by equivalent documentation issued by other
member states of the European Union. This also applies to attestations provided within the
context of the Treaty establishing the European Economic Community (EEC) or other bilateral
agreements, if applicable.
3 National Technical Approval does not replace the permits, approvals and certifications required
by law in connection with the realisation of building proposals.
4 National Technical Approval is granted without prejudice to the rights of third parties, particularly
in respect of private property rights.
5
Without prejudice to more extensive regulations contained in the "Special Provisions", the
manufacturers and distributors of the object of approval shall make copies of the National
Technical Approval available to indirect and direct users of the object of approval and shall
inform them that the National Technical Approval must be present at the site of use of the object.
Copies of the National Technical Approval shall be made available to the relevant authorities on
request.
6
The National Technical Approval may only be reproduced in its entirety. Publication of excerpts
requires permission from the Deutsches Institut für Bautechnik (German Institute for Structural
Engineering, DIBt). Text and drawings used in advertising must not contradict the National
Technical Approval. Translations of the National Technical Approval must bear the notice: "This
is a translation of the German original and has not been reviewed by the Deutsches Institut für
Bautechnik."
7
The National Technical Approval can be revoked at any time. The provisions of the National
Technical Approval may subsequently be amended or supplemented, particularly if required by
new technical findings.
Z82848.13
Page 2 of 10 | 27th February 2014
GB
1.40.21-14/13
31