Descargar Imprimir esta página

Mopar 82212110 Instrucciones De Montaje página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

46. Using a trim stick C­4755 or equivalent, work around
the perimeter of the bezel, and across the middle re­
leasing the retaining clips (1) and separate the bezel
from the instrument panel.
47. Disconnect the electrical connectors (1) and remove
the bezel.
WARNING: Disable the airbag system before attempting any steering wheel, steering column, or instrument
panel component diagnosis or service. Disconnect and isolate the negative battery (ground) cable, then wait
two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. Failure
to take the proper precautions may result in accidental airbag deployment and possible serious or fatal injury.
CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector
could damage the cable or radio.
Jun 16, 2010
11
K6860985 ver. 1

Publicidad

loading