Publicidad
Idiomas disponibles
Idiomas disponibles
65. Install the power outlet mount into the panel.
66. Align the splines on the outside of the power outlet re
ceptacle base connector receptacle with the grooves
on the inside of the mount.
67. Press firmly on the power outlet receptacle base until
the retaining bosses of the mount are fully engaged in
their receptacles.
NOTE: Install the radio to power source harness into the existing C3 radio if equipped, if not use the kit supplied
C3 connector.
68. Install the electrical radio to power source harness
hardshell connector to the back of the radio.
69. Connect the rest of the electrical harness and antenna
connectors to radio.
70. Position radio to instrument panel. Install and tighten
mounting fasteners.
71. Position the instrument panel center bezel over the in
strument panel and connect the electrical connectors
(1).
Jun 16, 2010
15
K6860985 ver. 1
Publicidad
