Additional Information; Specifications; Warranty; Technical Service - iLine microsystems microINR Instrucciones De Uso

7. ADDITIONAL INFORMATION

7.1 SPECIFICATIONS

• Dimensions of the Meter: 119 x 65 x 35 mm.
• Weight: 213±3 g. (Battery included).
• Screen: LCD 45 x 45 mm.
• Memory: 199 results / error messages with their date and
time.
• Power supply:
- Battery: Lithium 2400 mAh/2800 mAh; 3.7 V. Consumption: 1 A.
- Power supply: Only plug the charger to power supplies with
the following characteristics (Input): 100-240 V, 50-60 Hz,
Consumption: 0.2-0.6 A.
- Power supply (Output): 5 V dc, 1000-1200 mA via a
mini USB connection.
• Battery life: *approximately 70 tests.
• Operation conditions:
- Temperature: 15 ºC - 35 ºC.
- Maximum relative humidity: 80%.
• Meter storage temperature: -20 ºC to 50 ºC.
• Measurement range: 0.8 – 8.0 INR.
• Sample volume: at least 3 µL.
• Data transfer via a mini USB connection.
* Test conducted at 22 ºC with a 10 minute period between tests.

7.2 WARRANTY

iLine Microsystems warranties to the original buyer that the
microINR system is free of material and manufacture defects
for two years after the purchase date.
This warranty does not cover any component damaged due to
inadequate storage in environmental conditions outside the
defined range, accidents or modifications, incorrect use or
handling and misuse. The buyer must deliver a written
warranty complaint to the manufacturer within the
corresponding warranty period.

7.3 TECHNICAL SERVICE

If a problem persists after performing the actions stated in the
table of errors or if you want additional information, you can
contact your local distributor.
Note that any repair or modification to the microINR System can
only be performed by staff authorized by iLine Microsystems.
16