General Safety Notes; Notes On Ul Approval; Intended Use; Operating And Status Indicators - SICK WFE Instrucciones De Operación

1

General safety notes

2

Notes on UL approval

3

Intended Use

4

Operating and status indicators

8025247.1ABI / 2020-12-18 | SICK
Subject to change without notice
Read the operating instructions before commissioning.
■
■
Connection, mounting, and configuration may only be performed by trained
specialists.
■
NO
2006/42/EC
Not a safety component in accordance with the EU Machinery Directive.
SAFETY
■
Do not install the sensor at locations that are exposed to direct sunlight
or other weather influences, unless this is expressly permitted in the operating
instructions.
These operating instructions contain information required during the life cycle of
■
the sensor.
The device must be supplied by a Class 2 source of supply.
UL Environmental Rating: Enclosure type 1
Ambient temperature: max. 60°C.
The WFE Fork Sensor is an opto-electronic sensor, which works with a sender and
receiver unit. It is used for detecting objects optically and without contact.
The WFE sensor is a class A product. In household environments, devices of this kind
can cause radio interference. The user should take appropriate measures as required.
If the product is used for any other purpose or modified in any way, any warranty claim
against SICK AG shall become void.
1
2
3
4
6
Figure 1: Dimensional drawing
LED indicator yellow: Object detection
1
GENERAL SAFETY NOTES
5
1
5