Table Of Contents Of Product; Technical Features; Specifications To Assemble Your Front Baby Seat - Bobike exclusive mini plus Manual De Instrucciones

EN
A. MAIN SEAT
A1. STEEL FIXING ROD ENDS
B. RETENTION SYSTEM HARNESS
B1. SAFETY BUCKLE
B2. HEIGHT STRAP ADJUSTERS
B3. CENTRAL STRAP ADJUSTERS
C. HANDLE FOR LOCKING / UNLOCKING
THE SEAT
C1. BLOCKING LEGS

SPECIFICATIONS TO ASSEMBLE YOUR FRONT BABY SEAT

CAUTION
• This child bicycle seat must not be mounted to bicycles fitted with rear
shock absorbers.
• This child bicycle seat must not be mounted to a racing bicycle with
drop handlebar.
• This child bicycle seat must not be mounted to Motorized Vehicles such
as Mopeds and Scooters.
• This child bicycle seat must not be mounted in bicycles with triangular,
square or carbon fiber frames.
• This front baby seat must be assembled on bicycles with round and oval
frame head tube with diameters ranging from Ø22 to Ø28 mm.
• The child bicycle seat must be assembled on bicycles with wheels with
diameters of 26" - 29".
• This child bicycle seat is only suitable for carrying children with a
maximum weight of 15 Kg (and children with recommended ages ranging
from 9 months to 3 years of age - with the weight as the decisive variable).
• The total weight of the cyclist and the child transported must not exceed

TABLE OF CONTENTS OF PRODUCT

D. FOOTREST
D1. FOOTREST STRAP
D2. FOOTREST BUTTON
D3. FOOTREST STRAP BUTTON
E. MOUNTING BLOCK
E1. ALLEN KEY NRº 5
E2. 2 x WASHERS
E3. 2 x M6x65 BOLTS
E4. MOUNTING BLOCK BODY

TECHNICAL FEATURES

How and where the carrier is to be attached to the bicycle.
MAXIMUM CHILD
WARNING
OK
35 MM COMPATIBLE
FRAMES
Ø 22 TO 28 MM
ROUND
NOT OK
NOT COMPATIBLE BICYCLES
WEIGHT
CARBON DROP HANDLEBAR
15 kg
FIBER
the maximum permitted load permitted for the bicycle. Information on
the maximum load can be found in the operating instructions of the
bicycle. You can also contact the manufacturer for this question.
• The seat may only be mounted on a bicycle suitable for the attachment
of such additional loads.
• The position of the child bicycle seat must be adjusted so that the bicycle
rider does not touch the child bicycle seat with the feet when in motion.
• It's very important to adjust correctly the seat and its component parts for
optimum comfort and safety of the child. It's also important that the seat
does not slope forward so that the child does not tend to slide out of it. It's
also important that the backrest slope backward slightly.
• Check if all parts of the bicycle function correctly with the child bicycle
seat mounted.
• Check the instructions of the bicycle, and If you have any doubts
on fitting the child bicycle seat to your bicycle, please contact your
bicycle supplier for further information.
4
E4.1. HOLES TO INSERT THE A1 RODS
E5. KIT - STANDARD FOR Ø 22-28 mm
HANDLEBARS
E5.1. FRONT SPACER OF KIT
E5.2. REAR FASTENING PART OF KIT
E5.3. STEEL FASTENING PLATE FOR KIT
F. TRACEABILITY INFORMATION
NOT OK
NOT COMPATIBLE
BICYCLES
OVAL SQUARE TRIANGULAR
REAR SUSPENSION
SHOCK ABSORBER
CARBON FIBER
MOTOR (MOPEDS
AND SCOOTERS)